HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 19)

01.98
TNC 407/TNC 415/TNC 425 3 Software 2-15
– Thermal expansion compensation
– Machine datum
– "Free rotation"
– Changing the gear range through the PLC
– RPM upper limit per gear range
– Change in the organisation of PLC error messages
– Marker for special tool
– Interruption of PLC positioning
– Fast PLC input
– Arc end-point tolerance
– Locking of file types
– D596 rapid traverse from PLC
– D276 code number
– Axis-specific monitoring functions
– Compensation of tool length in the position display
– PLC: module 7031, module 9032, module 9083, module 9093, module 9094
TNC 415 A: 259 96x 02
TNC 415 E: 259 97x 02
TNC 407: 243 02x 02 Release 1/92
New functions:
– If MP7490 = 0, the datum is effective for all traverse ranges
– Non-linear characteristic curve for override potentiometer
– New process for traversing reference marks (MP1350.x = 3)
TNC 415 A: 259 96x 03
TNC 415 E: 259 97x 03
TNC 407: 243 02x 03 Release 3/92
New functions:
– ROT display in the status window
– PLC error messages if more than one of the markers M2485 to M2487 is set
– MP4070 has been added
– Handwheel symbol on screen for selected axis
– MP7640 (machine with handwheel) has new input values
– MP340 has been added (only for TNC 407)
– Module 9041 has been introduced (only for TNC 415 A)
– Dialog texts in Czech