HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 465

7-4 TNC 407/TNC 415/TNC 425 01.98
3.16.1 Call up of the Submit Program (SUBM) 7-123
3.16.2 Status Interrogation of a Submit Program (RPLY) 7-124
3.16.3 Cancellation of a Submit Program (CAN) 7-124
3.17 Constants Field (KF) 7-127
3.18.1 IF ... ELSE ... ENDI Structure 7-128
3.18.2 REPEAT ... UNTIL Structure 7-128
3.18.3 WHILE ... ENDW Structure 7-129
3.19.2 GLOBAL Instruction 7-132
3.19.3 EXTERN Instruction 7-133
4.1 Marker, Byte, Word, Doubleword 7-136
4.1.1 Copy in Marker or Word Range (Module 9000/9001) 7-136
4.1.2 Read in Word Range (Module 9010/9011/9012) 7-137
4.1.3 Write in Word Range (Module 9020/9021/9022) 7-138
4.2.1 Overwrite Machine Parameter (Module 9031) 7-139
4.2.2 Read Machine Parameter (Module 9032) 7-140
4.2.3 Select Machine Parameter File (Module 9033) 7-140
4.3 Status and Coordinates 7-141
4.3.1 Read Status Information (Module 9035) 7-141
4.3.2 Write Status Information (Module 9036) 7-144
4.3.3 Read Coordinates (Module 9040/9041/9042) 7-145
4.4.1 Number Conversion Binary to ASCII (Module 9050) 7-147
4.4.2 Number Conversion Binary to ASCII (Module 9051) 7-148
4.4.3 Number Conversion ASCII to Binary (Module 9052) 7-149
4.4.4 Conversion Binary to ASCII/Hexadecimal (Module 9053) 7-150
4.4.5 Conversion ASCII/Hexadecimal to Binary (Module 9054) 7-150
4.5.1 Copying a Number from a String (Module 9070) 7-151
4.5.2 Compute String Length (Module 9071) 7-152
4.6.1 Delete PLC Window (Module 9080) 7-152
4.6.2 Interrogate PLC Window (Module 9081) 7-153