HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 413)

01.98
TNC 407/TNC 415/TNC 425 3 List of machine parameters 5-11
Machine
parameter Function and input Change
via Reaction Page
MP810 Display mode for rotary axes and PLC auxiliary
axes
Entry: 0.0000 to 9 999.9999[
°
]
0 = Display +/-99 999.9999; software limit switch
active
≠
0 = Modulo value display; software limit switch
not active
MP810.0 X axis
MP810.1 Y axis
MP810.2 Z axis
MP810.3 4th axis
MP810.4 5th axis
PLC EDIT 4-135
MP850 Synchronized axes
Entry: 0 to 5
0 = Main axis
1 = Axis tracked to X axis
2 = Axis tracked to Y axis
3 = Axis tracked to Z axis
4 = Axis tracked to 4th axis
5 = Axis tracked to 5th axis
MP850.0 X axis
MP850.1 Y axis
MP850.2 Z axis
MP850.3 4th axis
MP850.4 5th axis
PLC EDIT 4-49
MP855 Synchronization monitoring
Entry: 0 to 100.0000 [mm]
0 = Monitoring inactive
MP855.0 X axis
MP855.1 Y axis
MP855.2 Z axis
MP855.3 4th axis
MP855.4 5th axis
PLC EDIT 4-50
MP860 Datum for synchronization control
Entry: 0 or 1
0 = Datum at position upon switch-on
1 = Datum at reference marks (machine datum)
MP860.0 X axis
MP860.1 Y axis
MP860.2 Z axis
MP860.3 4th axis
MP860.4 5th axis
PLC EDIT 4-50