Update information, Update information no. 20 – HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 4

01/98
TNC 407/TNC 415/TNC 425
Update Information No. 20
1-1
Update Information No. 20
New NC software
In May 1996 the following new NC software versions were released:
TNC 407
280 58x 06
280 590 06
TNC 415B / TNC 425
280 54x 06
280 550 06
TNC 415F / TNC 425E
280 56x 06
280 570 06
Hardware
New Design for TNC 407
A new hardware design was introduced with the new TNC 410, TNC 426 and TNC 430 controls.
This changed design can also be used for the TNC 407. The visual display unit and keyboard unit
with the new design are gray in color and require a larger front-panel cutout.
The new BC 120 visual display unit is connected to the TNC 407 with a new cable
(Id. Nr. 312 878 ..) and adapter (Id. Nr. 313 434 02). The matching TE 400 B keyboard unit has the
Id Nr. 313 038 02. A matching gray MB 420 machine operating panel (Id. Nr. 293 757 12) is also
available.
Documentation
No replacement pages will be issued for this Technical Manual. You will find the updated
documentation on the CD-ROM entitled “TNCguide OEM” (Id. Nr. 208 935 92), available from
January 1998. Please contact HEIDENHAIN if you have not yet received this CD-ROM.