HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 408)

5-6
TNC 407/TNC 415/TNC 425 3 List of machine parameters 01.98
3 List of machine parameters
3.1 Measuring systems and machines
Machine
parameter Function and input Change
via Reaction Page
MP10 Active axes
Entry: %xxxxx
Bit 0 X axis 0 = not active
Bit 1 Y axis 1 = active
Bit 2 Z axis
Bit 3 4th axis
Bit 4 5th axis
RESET 4-6
MP30 Checking the absolute position of the
distance-coded reference marks
Entry: %xxxxx
Bit 0 X axis 0 = not active
Bit 1 Y axis 1 = active
Bit 2 Z axis
Bit 3 4th axis
Bit 4 5th axis
PLC RUN 4-8
MP31 Checking the amplitude of the measuring
system signals
Entry: %xxxxx
Bit 0 X axis 0 = not active
Bit 1 Y axis 1 = active
Bit 2 Z axis
Bit 3 4th axis
Bit 4 5th axis
Bit 5 S-axis
PLC RUN 4-10
MP32 Checking the edge separation of the measuring
system signals
Entry: %xxxxx
Bit 0 X axis 0 = not active
Bit 1 Y axis 1 = active
Bit 2 Z axis
Bit 3 4th axis
Bit 4 5th axis
Bit 5 S-axis
PLC RUN 4-10