5 releases, 1 software types 243 05, 259 91 and 243 07, 2 software types 259 96, 259 97 and 243 02 – HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 18

3.5
Releases
New NC software versions are released by HEIDENHAIN at irregular intervals.
3.5.1 Software types 243 05, 259 91 and 243 07
Standard version TNC 415 A
NC-Software-Version Release
243 05x 02
2/90
243 05x 03
4/90
243 05x 04
5/90
243 05x 05
8/90
243 05x 08
9/90
243 05x 10
2/91
243 05x 11
4/91
243 05x 12
5/91
243 05x 13
6/91
243 05x 14
11/91
243 05x 15
3/92
243 05x 16
7/93
Export version TNC 415 E
NC-Software-Version Release
259 91x 08
11/90
259 91x 10
2/91
259 91x 11
4/91
259 91x 12
5/91
259 91x 13
6/91
259 91x 14
11/91
259 91x 15
3/92
259 91x 16
7/93
TNC 407
243 07x 03
7/90
243 07x 05
10/90
243 07x 07
2/91
243 07x 08
4/91
243 07x 09
5/91
243 07x 10
6/91
243 07x 11
11/91
243 07x 12
3/92
243 07x 13
7/93
New releases of these software types will be
made only to correct errors.
3.5.2 Software types 259 96, 259 97 and 243 02
TNC 415 A:
259 96x 01
TNC 415 E:
259 97x 01
TNC 407:
243 02x 01
Release 8/91
New functions:
–
Digitising with TS 120
–
Rigid tapping
–
Input resolution and display step 0.0001 mm for TNC 415 A
–
Re-approaching the contour
–
Compensation of reversal spikes in circular movements
–
New format for PLC-EPROM
–
Machine parameter editor
–
FN15: PRINT
–
New machine parameter for setting screen colours