HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 403)

01.98
TNC 407/TNC 415/TNC 425 5-1
5
Machine parameters – Contents
1 What is a machine parameter? 5-2
1.1 User parameters 5-2
2 Input/output of machine parameters 5-3
2.1 Entry format 5-3
2.2 Activating the machine parameter settings 5-4
2.3 Changing the entry values 5-4
2.3.1 Manual input 5-4
2.3.2 Changing the entry values via PLC 5-5
3 List of machine parameters 5-6
3.1 Measuring systems and machines 5-6
3.2 Positioning 5-13
3.3 Operation with feed precontrol 5-17
3.4 Operation with servo lag 5-18
3.5 Digital speed control (only TNC 425) 5-20
3.6 Spindle 5-22
3.7 Integral PLC 5-25
3.8 Setting the data interface 5-26
3.9 Measuring with a 3D touch probe 5-29
3.9.1 Digitizing with TS 120 (only with digitizing option) 5-29
3.9.2 Digitizing with TM 110 (only with digitizing option) 5-30
3.9.3 Tool calibration with TT 110 5-31
3.10 Tapping 5-32
3.11 Display and operation 5-33
3.12 Machining and program run 5-41
3.13 Hardware 5-45