HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 445

Machine
parameter
Function and input
Change
via
Reaction
Page
Calculate the tool change position from MP951 in
block scan
Entry: %xxxxx
Constant feed rate in corners
Entry: 0.0001 to 179.9999 [°]
Datum in datum table
Entry: 0 or 1
0 = Datum point is workpiece datum
1 = Datum point is machine datum
Output of tool number or pocket number with
TOOL CALL block
Entry: 0 to 6
0 = No output
1 = Output of tool number only when tool number
2 = Output of tool number with every TOOL
3 = Output of pocket number (W262) and tool
number (W264) only when tool number
changes
4 = Output of pocket number (W262) and tool
number (W264) with every TOOL CALL block
5 = Output of pocket number (W262) and tool
number (W264) only when tool number
changes. Pocket table does not change.
6 = Output of pocket number (W262) and tool
number (W264) with every TOOL CALL
block. Pocket table does not change.