HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 316
MP6322
Assignment of touch probe axes to the machine axes
Entry:
0 to 2
0 =
Touch probe axis X
1 =
Touch probe axis Y
2 =
Touch probe axis Z
MP6322.0
Machine axis X
MP6322.1
Machine axis Y
MP6322.2
Machine axis Z
MP6330
Maximum stylus deflection (measuring touch probe)
Entry:
0.1 to 4.000 [mm]
MP6350
Feed rate for positioning to the MIN point and contour approach
(measuring touch probe)
Entry:
10 to 3000 [mm/min]
MP6360
Probing feed rate (measuring touch probe)
Entry: 10 to 3000 [mm/min]
MP6361
Rapid traverse in scanning cycle (measuring touch probe)
Entry: 10 to 10 000 [mm/min]
MP6362
Feed rate reduction if stylus of the TM 110 is deflected away from its path
Entry:
0 or 1
0 =
Feed rate reduction not active
1 =
Feed rate reduction active
MP6390
Target window for contour-line end point
Entry:
0.1000 to 4.0000 [mm]