HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 416)

5-14
TNC 407/TNC 415/TNC 425 3 List of machine parameters 01.98
Machine
parameter Function and input Change
via Reaction Page
MP1020 Manual feed
Entry: 10 to 300 000 [mm/min]
MP1020.0 X axis
MP1020.1 Y axis
MP1020.2 Z axis
MP1020.3 4th axis
MP1020.4 5th axis
PLC EDIT 4-70
MP1030 Positioning window
Entry: 0.0001 to 2.0000 [mm] or [°]
MP1030.0 X axis
MP1030.1 Y axis
MP1030.2 Z axis
MP1030.3 4th axis
MP1030.4 5th axis
PLC EDIT 4-87
MP1040 Polarity of the nominal value voltage for the
positive direction of traverse
Entry: %xxxxx
Bit 0 Axis X 0 = positive
Bit 1 Axis Y 1 = negative
Bit 2 Axis Z
Bit 3 4th axis
Bit 4 5th axis
4-8
MP1050 Analogue voltage for rapid traverse
Entry: 1.000 to 9.000 [V]
MP1050.0 X axis
MP1050.1 Y axis
MP1050.2 Z axis
MP1050.3 4th axis
MP1050.4 5th axis
PLC EDIT 4-70
MP1060 Acceleration
Entry: 0.001 to 5.000 [m/s
2 ]
MP1060.0 X axis
MP1060.1 Y axis
MP1060.2 Z axis
MP1060.3 4th axis
MP1060.4 5th axis
PLC EDIT 4-68
MP1070 Radial acceleration
Entry: 0.001 to 5.000 [m/s
2 ]
PLC RUN 4-80