HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 5)

01.98
TNC 407/TNC 415/TNC 425 2-1
Introduction – Contents 2
1 Hardware concept 2-2
2 Technical data TNC 407/TNC 415 B/TNC 425 2-3
3 Software 2-7
3.1 NC-Software 2-7
3.1.1 NC-Software number 2-7
3.1.2 Software types 2-7
3.1.3 Software option 2-8
3.1.4 Software/Hardware 2-9
3.2 PLC-Software 2-11
3.3 EPROM sockets 2-11
3.3.1 TNC 415 A/TNC 415 E 2-11
3.3.2 TNC 415 B/TNC 415 F and TNC 425 A/TNC 425 E 2-12
3.3.3 TNC 407 2-13
3.4 Software replacement 2-13
3.5 Releases 2-14
3.5.1 Software types 243 05, 259 91 and 243 07 2-14
3.5.2 Software types 259 96, 259 97 and 243 02 2-14
3.5.3 Software types 259 93, 259 94 and 243 03 2-18
3.5.4 Software types 280 54, 280 56 and 280 58 2-23