HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 426)

5-24
TNC 407/TNC 415/TNC 425 3 List of machine parameters 01.98
Machine
parameter Function and input Change
via Reaction Page
MP3420 Positioning window for spindle
Entry: 0 to 65 535 [increments]
1 increment is equivalent to about 0.088 degree
=
360 degrees
1024 lines quadruple evaluation
×
PLC RUN 4-108
MP3430 Reference mark deviation from the desired
position (Spindle-pre-set)
Entry: 0 to 360 [°] PLC RUN 4-108
MP3440.0-7 kv factor for spindle-orientation
Entry: 0.1 to 10 [
1000°/min
°
]
PLC RUN 4-108
MP3510.0-7 Spindle speed for each gear range
Entry: 0 to 99 999.999 [rpm] PLC EDIT 4-97
MP3515.0-7 Maximum spindle speed in each gear range
Entry: 0 to 99 999.999 [rpm] PLC EDIT 4-97
MP3520.0 Spindle-speed activated by marker M2501
Entry: 0 to 99 999.999 [rpm] PLC RUN 4-108
MP3520.1 Spindle-speed for spindle-orientation
Entry: 0 to 99 999.999 [rpm] PLC RUN 4-106