PLANET XGS3-24040 - Manual (Page 99)

XGS3 Command Guide
3-99
Switch(config)#cluster member mac-address 11-22-33-44-55-66 id 5
3.8 cluster member auto-to-user
Command:
cluster member auto-to-user
Function:
All members will be deleted when configuring no cluster auto-add. Users need to change automatically added
members to manually added ones to keep them.
Parameter:
None.
Default:
None.
Command Mode:
Global Mode.
Usage Guide:
Execute this command on a switch to change automatically added members to manually added ones.
Example:
change automatically added members to manually added ones.
Switch(config)#cluster member auto-to-user
3.9 cluster reset member
Command:
cluster reset member [id | mac-address ]
Function:
In the commander switch, this command can be used to reset the member switch.
Parameter:
member-id: ranging from 1 to 128. Use hyphen “-” or semicolon “;” to specify more than one member; if no value is
provided, it means to reboot all member switches.
Default:
Boot all member switches.
Command mode:
Admin Mode.
Instructions:
In the commander switch, users can use this command to reset a member switch. If this command is executed in a
non-commander switch, an error will be displayed.
Example:
In the commander switch, reset the member switch 1.
Switch#cluster reset member 1