PLANET XGS3-24040 - Manual (Page 141)

8-7
Function:
Display the configuration information of global LLDP, such as the list of all the ports with LLDP
enabled, the interval of sending update messages, the configuration of aging time, the interval
needed by the sending module to wait for re-initialization, the interval of sending TRAP, the
limitation of the number of the entries in the Remote Table.
Parameters:
None.
Default:
Do not display the configuration information of global LLDP.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check all the configuration information of global LLDP by using “show lldp”.
Example:
Check the configuration information of global LLDP after it is enabled on the switch.
Switch(config)#show lldp
-----LLDP GLOBAL INFORMATIONS-----
LLDP enabled port : Ethernet 1/1
LLDP interval :30
LLDP txTTL :120
LLDP txShutdownWhile :2
LLDP NotificationInterval :5
LLDP txDelay :20
-------------END------------------
8.13 show lldp traffic
Command:
show lldp traffic
Function:
Display the statistics of LLDP data packets.
Parameters:
None.
Default:
Do not display the statistics of LLDP data packets.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the statistics of LLDP data packets by using “show lldp traffic”.