PLANET XGS3-24040 - Manual (Page 565)

35-278
Command Mode: Admin and configuration mode
Usage Guide: We can select BGP route of the required AS with normal expression.
Example:
Switch#sh ip bgp regexp 100
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.64 0 0 500 100 600 ?
Total number of prefixes 1
35.103 show ip bgp route-map
Command: show ip bgp [] route-map []
Function: For displaying the BGP routes meets the specific related route map.
Parameter: : such as “ipv4 unicast”
: Name of route map
Default: None
Command Mode: Admin and configuration mode
Usage Guide: Configure the route map with the route-map command, through which it can be displayed
that process routes with route map. The command will display the routes meet specific route map.
Example:
Switch#sh ip bgp route-map rmp
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.64 0 0 500 100 600 ?
*> 10.1.1.68 0 0 300 ?
Total number of prefixes 1
35.104 show ip bgp scan
Command: show ip bgp scan
Function: For displaying BGP scan messages.
Parameter: None
Default: None
Command Mode: Admin and configuration mode
Usage Guide: Scan regularly the nexthop messages. The command can show the current interval and
related routes.