PLANET XGS3-24040 - Manual (Page 524)

35-237
Example:
Switch(config)# bgp rfc1771-path-select
Switch(config)# no bgp rfc1771-path-select
35.25 bgp rfc1771-strict
Command: bgp rfc1771-strict
no bgp rfc1771-strict
Function: Set whether strictly follows the rfc1771 restrictions. The “no bgp rfc1771-strict” command set
to not strictly following.
Parameter: None.
Default: Not following rfc 1771 restrictions.
Command Mode: Global mode
Usage Guide: With this attribute set, generation types of routes from protocols such as RIP, OSPF, ISIS,
etc will be regarded as IGP (internal generated), or else as incomplete.
Example:
Switch(config)# bgp rfc1771-strict
Switch(config)# no bgp rfc1771-strict
35.26 bgp router-id
Command: bgp router-id
no bgp router-id []
Function: Configure the router ID manually. The “no bgp router-id []” cancels this
configuration.
Parameter: : Router ID.
Default: Automatically acquire router ID.
Command Mode: BGP route mode
Usage Guide: Manually set the router ID with this command.
Example:
Switch(config-router)# bgp router-id 1.1.1.1