42 ip extcommunity-list, 43 neighbor activate, Ip extcommunity – PLANET XGS3-24040 User Manual
Page 532: List, Neighbor activate
35-245
Example:
Switch(config)# ip community-list LN permit 100:10
35.42 ip extcommunity-list
Command: ip extcommunity-list {
{deny|permit} <.COMMUNITY>
no ip extcommunity-list {
Function:
Configure the extended community-list. The “no ip extcommunity-list
{
{deny|permit}
<.COMMUNITY>“ command is for deleting the extended community list.
Parameter:
<1-199>: Standard or extended community number.
<.COMMUNITY >: Members of the community list, which may be the combination of aa:nn,
or internet, local-AS, no-advertise, and no-export. It can be shown in regular expressions under extended
conditions.
Default: None.
Command Mode: Global mode
Usage Guide: With this command we can configure the community-list so to supply terms for the
pass/filter/search.
Example:
Switch(config)# ip extcommunity-list LN permit 100:10
35.43 neighbor activate
Command: neighbor {
no neighbor {
Function: Configure the address family routing which do or do not switch specific address-family with
BGP neighbors. The “no neighbor {
which do not switch the specified address family.
Parameter:
Default: Enable the routing switch of IP unicast address-family, and disable other address-families.
Command Mode: BGP route mode and address-family mode
Usage Guide: IP unicast is configured under BGP route mode. Configure whether specific