PLANET XGS3-24040 - Manual (Page 410)

31-123
31.5 debug rip redistribute message send
Command:
debug rip redistribute message send
no debug rip redistribute message send
Function:
To enable the debugging of sending messages for routing redistribution messages from OSPF
process or BGP protocol for RIP. The no form of this command will disable the debugging
messages.
Parameter:
None.
Default:
Close the debug by default.
Command Mode:
Admin Mode.
Usage Guide:
None.
Example:
Switch#debug rip redistribute message send
Switch#no debug rip redistribute message send
31.6 debug rip redistribute route receive
Command:
debug rip redistribute route receive
no debug rip redistribute route receive
Function:
To enable debugging of received messages from NSM for RIP. The no form of this command will
disable debugging of received messages from NSM for RIP.
Parameter:
None.
Default:
Close the debug by default.
Command Mode:
Admin Mode.
Usage Guide:
None.
Example:
Switch#debug rip redistribute route receive
Switch#no debug rip redistribute route receive