PLANET XGS3-24040 - Manual (Page 428)

31-141
31.35 show debugging rip
Command:
show debugging rip
Function:
Show RIP event debugging, RIP packet debugging and RIP nsm debugging status.
Command Mode:
Admin and configuration mode
Example:
Switch# show debugging rip
RIP debugging status:
RIP event debugging is on
RIP packet detail debugging is on
RIP NSM debugging is on
31.36 show ip protocols rip
Command:
show ip protocols rip
Function:
Show the RIP process parameter and statistics information.
Command Mode:
Admin and configuration mode
Example:
show ip protocols rip
Routing Protocol is "rip"
Sending updates every 30 seconds with +/-50%, next due in 8 seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribution metric is 1
Redistributing: static
Default version control: send version 2, receive version 2
Interface Send Recv Key-chain
Vlan1 2 2
Routing for Networks:
Vlan1
Vlan2
Routing Information Sources:
Gateway Distance Last Update Bad Packets Bad Routes
20.1.1.1 120 00:00:31 0 0