PLANET XGS3-24040 - Manual (Page 682)

XGS3 Command Guide
39-14
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect PIM NEXTHOP changing information by the pim nexthop switch.
Example:
Switch# debug ipv6 pim nexthop
39.3.6 debug ipv6 pim nsm
Command: debug ipv6 pim nsm
no debug ipv6 pim nsm
Function: Enable or Disable pim debug switch communicating with Network Services.
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect the communicating information between PIM and Network Services by this switch.
Example:
Switch# debug ipv6 pim nsm
39.3.7 debug ipv6 pim packet
Command: debug ipv6 pim packet [in|out|]
no debug ipv6 pim packet [in|out|]
Function: Enable or Disable PIM debug switch.
Parameter: in display only received PIM packets
out display only transmitted PIM packets
none display both
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect the received and transmitted PIM packets by this switch.
Example:
Switch# debug ipv6 pim packet in
39.3.8 debug ipv6 pim state
Command: debug ipv6 pim state
no debug ipv6 pim state
Function: Enable or Disable PIM debug switch.
Parameter: None
Default: Disabled
Command Mode: Admin Mode.