PLANET XGS3-24040 - Manual (Page 695)

XGS3 Command Guide
39-27
39.3.34 show ipv6 pim mroute sparse-mode
Command: show ipv6 pim mroute sparse-mode
Function: Display the multicast route table of PIM-SM.
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display the BSP routers in the network maintained by PIM-SM.
Example:
Switch#show ipv6 pim mr group ff1e::15
IPv6 Multicast Routing Table
(*,*,RP) Entries: 0
(*,G) Entries: 1
(S,G) Entries: 1
(S,G,rpt) Entries: 1
FCR Entries: 0
(*, ff1e::15)
RP: 2000:1:111::100
RPF nbr: ::
RPF idx: None
Upstream State: JOINED
Local ..l.............................
Joined ................................
Asserted ................................
FCR:
(2000:1:111::11, ff1e::15)
RPF nbr: ::
RPF idx: None
SPT bit: 1
Upstream State: JOINED
Local ................................
Joined ................................
Asserted ................................
Outgoing ..o.............................
(2000:1:111::11, ff1e::15, rpt)
RP: 2000:1:111::100
RPF nbr: ::
RPF idx: None
Upstream State: NOT PRUNED
Pruned ................................
Outgoing ..o.............................