PLANET XGS3-24040 - Manual (Page 862)

62-11
62.14 show telnet login
Command: show telnet login
Function: List information of currently available telnet clients which are connected to the switch.
Command Mode: Admin Mode and Configuration Mode.
Usage Guide: This command used to list the information of currently available telnet clients which are
connected to the switch.
Example:
Switch#show telnet login
Authenticate login by local.
Login user:
Aa
62.15 show temperature
Command: show temperature
Function: Show the temperature of the CPU.
Parameters: None.
Command Mode: Any modes
Usage Guide: This command can be used to monitor the CPU temperature of the switch.
Example: Show the temperature of the CPU of the switch.
Switch(Config)#show temperature
Temperature: 47.0625 ℃
62.16 show tech-support
Command: show tech-support
Function: Display various information about the switch and the running tasks. This command is used to
diagnose the switch by the technical support specialist.
Command Mode: Admin mode and configuration mode
Usage Guide: When failure occurred on the switch, this command can be used to get related information,
in order to diagnose the problems.
Example:
Switch#show tech-support
62.17 show udp
Command: show udp
Function: Display the current UDP connection status established to the switch.
Command mode: Admin Mode