PLANET XGS3-24040 - Manual (Page 101)

XGS3 Command Guide
3-101
startup-config
start the configuration file
nos.img
system file
Command mode:
Admin Mode
Usage Guide:
The commander distributes the remote upgrade command to members via the TCP connections between them,
causing the number to implement the remote upgrade and reboot. Trying to execute this command on a
non-commander switch will return errors. If users want to upgrade more than one member, these switches should be
the same type to avoid boot failure induced by mismatched IMG files.
Example:
Remotely upgrade a member switch from the commander switch, with the member-id being 1, src-ul being
ftp://admin:[email protected]/nos.img, and dst-url being nos.img
Switch#cluster update member 1 ftp://admin:[email protected]/nos.img nos.img
3.12 debug cluster
Command:
debug cluster {statemachine | application | tcp}
no debug cluster {statemachine | application | tcp}
Function:
Enable the application debug of cluster; the no operation of this command will disable that.
Parameters:
statemachine: print debug information when the switch status changes.
application: print debug information when there are users trying to configure the switch after logging
onto it via SNMP, WEB.
tcp: the TCP connection information between the commander members.
Default:
None.
Command Mode:
Admin Mode.
Usage Guide:
None.
Example:
Enable the debug information of status change on the switch.
Swtich#debug cluster statemachine
3.13 debug cluster packets
Command:
debug cluster packets {DP | DR | CP} {receive | send}