PLANET XGS3-24040 - Manual (Page 473)

33-186
no key
Function:
This command is for managing and adding keys in the key chain. The “no key ” command
deletes one key.
Parameter:
<keyid> is key ID, ranging between 0-2147483647.
Command Mode:
keychain Mode and keychain-key Mode
Usage Guide:
The command permits entering the keychain-key mode and set the passwords corresponding to the
keys.
Example:
Switch#config terminal
Switch(config)#key chain mychain
Switch(config-keychain)#key 1
Switch(config-keychain-key)#
33.40 key chain
Command:
key chain
no key chain < name-of-chain >
Function:
This command is for entering a keychain manage mode and configure a keychain. The “no key
chain < name-of-chain >” command deletes one keychain.
Parameter:
is the name string of the keychain the length of which is not specifically limited.
Command Mode:
Global Mode and Keychain Mode.
Example:
Switch#config terminal
Switch(config)#key chain mychain
Switch(config-keychain)#
33.41 log-adjacency-changes detail
Command: