PLANET XGS3-24040 - Manual (Page 62)

XGS3 Command Guide
1-62
no ssh-server authentication-retries
Function:
Configure the number of times for retrying SSH authentication; the “no ssh-server authentication-retries”
command restores the default number of times for retrying SSH authentication.
Parameter:
authentication-retries > is the number of times for retrying authentication; valid range is 1 to 10.
Command mode:
Global Mode
Default:
The number of times for retrying SSH authentication is 3 by default.
Example:
Set the number of times for retrying SSH authentication to 5.
Switch(config)#ssh-server authentication-retries 5
1.2.12 ssh-server enable
Command:
ssh-server enable
no ssh-server enable
Function:
Enable SSH function on the switch; the “no ssh-server enable” command disables SSH function.
Command mode:
Global Mode
Default:
SSH function is disabled by default.
Usage Guide:
In order that the SSH client can log on the switch, the users need to configure the SSH user and enable SSH
function on the switch.
Example:
Enable SSH function on the switch.
Switch(config)#ssh-server enable
1.2.13 ssh-server host-key create rsa
Command:
ssh-server host-key create rsa [modulus < modulus >]
Function:
Generate new RSA host key.
Parameter:
modulus is the modulus which is used to compute the host key; valid range is 768 to 2048. The default value is
1024.
Command mode:
Global Mode
Default:
The system uses the key generated when the ssh-server is started at the first time.