PLANET XGS3-24040 - Manual (Page 496)

34-209
34.10 debug ipv6 ospf nfsm
Command:
[no] debug ipv6 ospf nfsm [status|events|timers]
Function:
Open debugging switches showing showing OSPF neighbor state machine; the “no debug ipv6 ospf
nfsm [status|events|timers]”command closes this debugging switch.
Default:
Closed.
Command Mode:
Admin mode
Switch#debug ipv6 ospf nfsm
1970/01/01 01:14:07 IMI: NFSM[192.168.2.3-000007d4]: LS update timer expire
1970/01/01 01:14:07 IMI: NFSM[192.168.2.1-000007d3]: LS update timer expire
1970/01/01 01:14:08 IMI: NFSM[192.168.2.1-000007d3]: Full (HelloReceived)
1970/01/01 01:14:08 IMI: NFSM[192.168.2.1-000007d3]: nfsm_ignore called
1970/01/01 01:14:08 IMI: NFSM[192.168.2.1-000007d3]: Full (2-WayReceived)
34.11 debug ipv6 ospf nsm
Command: [no] debug ipv6 ospf nsm [interface|redistribute]
Function: Open debugging switches showing showing OSPF NSM, the “no debug ipv6 ospf nsm
[interface|redistribute]” command closes this debugging switch.
Default: Closed.
Command Mode: Admin mode
34.12 debug ipv6 ospf packet
Command: [no] debug ipv6 ospf packet [dd | detail | hello | ls-ack | ls-request | ls-update | recv |
send]
Function: Open debugging switches showing OSPF packet messages; the “no debug ipv6 ospf packet
[dd | detail | hello | ls-ack | ls-request | ls-update | recv | send]” command closes this debugging
switch.
Default: Closed.
Command Mode: Admin Mode.
34.13 debug ipv6 ospf redistribute message send
Command: debug ipv6 ospf redistribute message send
no debug ipv6 ospf redistribute message send
Function: To enable/disable debugging of sending command from IPv6 OSPF process redistributed to
other IPv6 OSPF process routing.
Parameter: None.