PLANET XGS3-24040 - Manual (Page 865)

63-1
Chapter 63 Commands for Reload
Switch after Specified Time
63.1 reload after
Command: reload after
Function: Reload the switch after a specified period of time.
Parameters: the specified time period, HH（hours）ranges from 0 to 23, MM（minutes）
and SS（seconds）range from 0 to 59.
Command Mode: Admin mode
Usage Guide: With this command, users can reboot the switch without shutdown its power after a
specified period of time, usually when updating the switch version. The switch can be rebooted after a
period of time instead of immediately after its version being updated successfully. This command will not
be reserved, which means that it only has one-time effect.
Example: Set the switch to automatically reload in 10 hours and 1second.
Switch#reload after 10:00:01
Process with reboot after? [Y/N] y
Related Commands: reload, reload cancel, show reload
63.2 reload cancel
Command: reload cancel
Function: Cancel the specified time period to reload the switch.
Parameters: None
Command Mode: Admin mode.
Usage Guide: With this command, users can cancel the specified time period to reload the switch, that is,
to cancel the configuration of command ”reload after”. This command will not be reserved.
Example: Prevent the switch to automatically reboot after the specified time.
Switch#reload cancel
Reload cancel successful.
Related Commands: reload, reload after, show reload
63.3 show reload
Command: show reload
Function: Display the user’s configuration of command “reload after”.
Parameters: None.
Command Mode: Admin and configuration mode
Usage Guide: With this command, users can view the configuration of command “reload after” and
check how long a time is left before rebooting the switch.