PLANET XGS3-24040 - Manual (Page 144)

8-10
Enable the debug information of LLDP function, the no operation of this command will disable the
debug information of LLDP function.
Parameters:
None.
Default:
Disable the debug information of LLDP function.
Command Mode:
Admin Mode.
Usage Guide:
When the debug switch is enabled, users can check the receiving and sending of packets and other
information.
Example:
Enable the debug switch of LLDP function on the switch.
Switch(config)#debug lldp
8.18 debug lldp packets
Command:
debug lldp packets interface ethernet <IFNAME>
no debug lldp packets interface ethernet <IFNAME>
Function:
Display the message-receiving and message-sending information of LLDP on the port; the no
operation of this command will disable the debug information switch.
Parameters:
None.
Default:
Disable the debug information on the port.
Command Mode:
Admin Mode.
Usage Guide:
When the debug switch is enabled, users can check the receiving and sending of packets and other
information on the port.
Example:
Enable the debug switch of LLDP function on the switch.
Switch(config)# debug lldp packets interface ethernet 1/1
%Jan 01 00:02:40 2006 LLDP-PDU-TX PORT= ethernet 1/1.