PLANET XGS3-24040 - Manual (Page 641)

XGS3 Command Guide
38-70
38.8.10 show ip multicast destination-control
Command: show ip multicast destination-control [detail]
show ip multicast destination-control interface [detail]
show ip multicast destination-control host-address [detail]
show ip multicast destination-control [detail]
Function: Display multicast destination control
Parameter: detail: expresses if it display information in detail or not..
: interface name or interface aggregation name, such as Ethernet1/1,
port-channel 1 or ethernet1/1.
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: The command displays multicast destination control rules of configuration, including detail
option, and access-list information applied in detail.
Example:
Switch (config)#show ip multicast destination-control
ip multicast destination-control is enabled
ip multicast destination-control 11.0.0.0/8 access-group 6003
ip multicast destination-control 1 00-03-05-07-09-11 access-group 6001
multicast destination-control access-group 6000 used on interface Ethernet1/13
switch(config)#
38.8.11 show ip multicast destination-control
access-list
Command: show ip multicast destination-control access-list
show ip multicast destination-control access-list <6000-7999>
Function: Display destination control multicast access-list of configuration.
Parameter: <6000-7999>: access-list number.
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: The command displays destination control multicast access-list of configuration.
Example:
Switch# sh ip multicast destination-control acc
access-list 6000 deny ip any any-destination
access-list 6000 deny ip any host-destination 224.1.1.1
access-list 6000 deny ip host 2.1.1.1 any-destination
access-list 6001 deny ip host 2.1.1.1 225.0.0.0 0.255.255.255
access-list 6002 permit ip host 2.1.1.1 225.0.0.0 0.255.255.255
access-list 6003 permit ip 2.1.1.0 0.0.0.255 225.0.0.0 0.255.255.255