PLANET XGS3-24040 - Manual (Page 178)

11-44
Example:
Display the configuration of the current Protocol-based VLAN.
Switch#show protocol-vlan
Protocol_Type VLAN_ID Priority
------------------- ------------- ---------
mode ethernetii etype 0x800 200 4
mode ethernetii etype 0x860 200 4
mode snap etype 0xabc 100 5
mode llc dsap 0xac ssap 0xbd 100 5
11.2.10 show subnet-vlan
Command:
show subnet-vlan
Function:
Display the configuration of the IP-subnet-based VLAN on the switch.
Parameter:
None.
Command Mode:
Admin Mode and other Configuration Mode.
Usage Guide:
Display the configuration of the IP-subnet-based VLAN on the switch.
Example:
Display the configuration of the current IP-subnet-based VLAN.
Switch#show subnet-vlan
IP-Address Mask VLAN_ID
------------------ ----------------- -------
192.168.1.165 255.255.255.0 2
202.200.121.21 255.255.0.0 2
10.0.0.1 255.248.0.0 5
11.2.11 show subnet-vlan interface
Command:
show subnet-vlan interface
Function:
Display the port at IP-subnet-based VLAN.
Parameter:
None.