PLANET XGS3-24040 - Manual (Page 292)

18-5
18.8 anti-arpscan log enable
Command:
anti-arpscan log enable
no anti-arpscan log enable
Function:
Enable ARP scanning prevention log function; ”no anti-arpscan log enable” command will disable
this function.
Parameters:
None.
Default Settings:
Enable ARP scanning prevention log function.
Command Mode:
Global configuration mode
User Guide:
After enabling ARP scanning prevention log function, users can check the detailed information of
ports being closed or automatically recovered by ARP scanning prevention or IP being disabled and
recovered by ARP scanning prevention. The level of the log is “Warning”.
Example:
Enable ARP scanning prevention log function of the switch.
Switch(config)#anti-arpscan log enable
18.9 anti-arpscan trap enable
Command:
anti-arpscan trap enable
no anti-arpscan trap enable
Function:
Enable ARP scanning prevention SNMP Trap function; ”no anti-arpscan trap enable” command
disable ARP scanning prevention SNMP Trap function.
Parameters:
None.
Default Settings:
Disable ARP scanning prevention SNMP Trap function.
Command Mode:
Global configuration mode
User Guide:
After enabling ARP scanning prevention SNMP Trap function, users will receive Trap message
whenever a port is closed or recovered by ARP scanning prevention, and whenever IP t is closed or
recovered by ARP scanning prevention.
Example:
Enable ARP scanning prevention SNMP Trap function of the switch.
Switch(config)#anti-arpscan trap enable