PLANET XGS3-24040 - Manual (Page 584)

XGS3 Command Guide
38-13
38.3.2 debug pim event
Command: debug pim event
no debug pim event
Function: Enable or Disable pim event debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Enable pim event debug switch and display events information about pim operation.
Example:
Switch#
Switch# debug ip pim event
Switch#
38.3.3 debug pim mfc
Command: debug pim mfc
no debug pim mfc
Function: Enable or Disable pim mfc debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Enable pim mfc debug switch and display generated and transmitted multicast id’s
information.
Example:
Switch# debug ip pim mfc
38.3.4 debug pim mib
Command: debug pim mib
no debug pim mib
Function: Enable or Disable PIM MIB debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode.
Usage Guide: Inspect PIM MIB information by PIM MIB debug switch. It’s not available now and it’s for
the future extension.
Example:
Switch# debug ip pim mib