PLANET XGS3-24040 - Manual (Page 730)

Commands for Security Function Chapter 2 Commands for 802.1x
41-2
Chapter 41 Commands for ACL
41.1 absolute-periodic/periodic
Command: [no] absolute-periodic {Monday|Tuesday|Wednesday|Thursday|Friday
|Saturday|Sunday}<start_time>to{Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|
Sunday}
[no]periodic{{Monday+Tuesday+Wednesday+Thursday+Friday+Saturday+Sunday}|d
aily| weekdays | weekend} <start_time> to <end_time>
Functions: Define the time-range of different commands within one week, and every week to circulate
subject to this time.
Parameters:
Friday （Friday)
Monday （Monday)
Saturday （Saturday)
Sunday （Sunday)
Thursday （Thursday）
Tuesday （Tuesday)
Wednesday （Wednesday)
daily （Every day of the week）
weekdays （Monday thru Friday）
weekend （Saturday thru Sunday）
start_time start time ,HH:MM:SS (hour: minute: second)
end_time end time,HH:MM:SS (hour: minute: second)
Remark: time-range polling is one minute per time, so the time error shall be <= one minute.
Command Mode: time-range mode
Default: No time-range configuration.
Usage Guide: Periodic time and date. The definition of period is specific time period of Monday to
Saturday and Sunday every week.
day1 hh:mm:ss To day2 hh:mm:ss or
{[day1+day2+day3+day4+day5+day6+day7]|weekend|weekdays|daily} hh:mm:ss To hh:mm:ss
Examples: Make configurations effective within the period from9:15:30 to 12:30:00 during Tuesday to
Saturday.
Switch(config)#time-range admin_timer
Switch(Config-Time-Range-admin_timer)#absolute-periodic Tuesday 9:15:30 to Saturday
12:30:00
Make configurations effective within the period from 14:30:00 to 16:45:00 on Monday,
Wednesday, Friday and Sunday.
Switch(Config-Time-Range-admin_timer)#periodic Monday Wednesday Friday Sunday
14:30:00 to 16:45:00