PLANET XGS3-24040 - Manual (Page 762)

Commands for Security Function Chapter 2 Commands for 802.1x
42-34
Example:
1. Display information about dot1x global parameter for the switch.
Switch#show dot1x
Global 802.1x Parameters
reauth-enabled no
reauth-period 3600
quiet-period 10
tx-period 30
max-req 2
authenticator mode passive
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable
dot1x-privateclient Disable
dot1x-unicast Disable
dot1x-web authentication Enable
802.1x is enabled on ethernet Ethernet1/1
Authentication Method:Port based
Max User Number:1
Status Authorized
Port-control Auto
Supplicant 00-30-4f-FE-2E-D3
Authenticator State Machine
State Authenticated
Backend State Machine
State Idle
Reauthentication State Machine
State Stop
802.1X is enabled on ethernet Ethernet1/16
Authentication Method: web based
Status Authorized
Port-control Auto
Supplicant IP 192.168.1.11
VLAN id 2
Displayed information
Explanation
Global 802.1x Parameters