PLANET XGS3-24040 User Manual

Page 117

XGS3 Command Guide

4-117

the showing information include port number, Link, Protocl status, Speed, Duplex, Vlan, port type and port name;

counter packets show package number statistics of all ethernet ports, include layer 2 unicast, broadcast, multicast,

error of input and output redirection package number; counter rate show the rate statistics of all ethernet ports, input

and output package number, byte number in 5 minutes and 5 seconds.

Example:

Show the information of VLAN 1

Switch#show interface vlan 1

Vlan1 is up, line protocol is up, dev index is 2005

Device flag 0x1003(UP BROADCAST MULTICAST)

IPv4 address is:

192.168.10.1 255.255.255.0 (Primary)

Hardware is EtherSVI, address is 00-00-00-00-00-01

MTU is 1500 bytes , BW is 0 Kbit

Encapsulation ARPA, loopback not set

5 minute input rate 0 bytes/sec, 0 packets/sec

5 minute output rate 0 bytes/sec, 0 packets/sec

The last 5 second input rate 0 bytes/sec, 0 packets/sec

The last 5 second output rate 0 bytes/sec, 0 packets/sec

Input packets statistics:

Input queue 0/600, 0 drops

0 packets input, 0 bytes, 0 no buffer

0 input errors, 0 CRC, 0 frame alignment, 0 overrun

0 ignored, 0 abort, 0 length error

Output packets statistics:

0 packets output, 0 bytes, 0 underruns

0 output errors, 0 collisions

Show the information of loopback 1:

Switch#show interface loopback 1

Loopback1 is up, line protocol is up, dev index is 2006

Device flag 0x100b(UP BROADCAST LOOP MULTICAST)