PLANET XGS3-24040 - Manual (Page 607)

XGS3 Command Guide
38-36
Example:
Switch#debug msdp filter
38.4.11 debug msdp fsm
Command: debug msdp fsm
no debug msdp fsm
Function: Enable/disable debug switch of MSDP fsm.
Parameter: None.
Default: Close the switch.
Command Mode: Admin Mode.
Usage Guide: Enable this switch, the fsm information of MSDP Peer will be displayed.
Example:
Switch#debug msdp fsm
38.4.12 debug msdp keepalive
Command: debug msdp keepalive
no debug msdp keepalive
Function: Enable/disable the debug switch of keepalive message information for MSDP protocol.
Parameter: None.
Default: close the switch.
Command Mode: Admin Mode.
Usage Guide: The information of receiving/sending keepalive message for MSDP protocol can be
monitored after enables this switch.
Example:
Switch#debug msdp keepalive
38.4.13 debug msdp nsm
Command: debug msdp nsm
no debug msdp nsm
Function: Enable/disable the switch of msdp nsm debug.
Parameter: None.
Default: Close the switch.
Command Mode: Admin Mode.
Usage Guide: The alternation information between running MSDP protocol and NSM module can be
monitored after enable this switch.
Example:
Switch#debug msdp nsm