PLANET XGS3-24040 - Manual (Page 573)

XGS3 Command Guide
38-2
Group
the destination address of the entries
Origin
the source address of the entries
Iif
ingress interface of the entries
Wrong
packets received from the wrong interface
Oif
egress interface of the entries
TTL
the value of TTL
38.2 Commands for PIM-DM
38.2.1 debug pim timer sat
Command: debug pim timer sat
no debug pim timer sat
Function: Enable debug switch of PIM-DM source activity timer information in detail; the “no debug pim
timer sat” command disenables the debug switch.
Parameter: None.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: Enable the switch, and display source activity timer information in detail.
Example:
Switch # debug ip pim timer sat
Remark: Other debug switches in PIM-DM are common in PIM-SM, including debug pim event, debug
pim packet, debug pim nexthop, debug pim nsm, debug pim mfc, debug pim timer, debug pim state, refer
to PIM-SM handbook.
38.2.2 debug pim timer srt
Command: debug pim timer srt
no debug pim timer srt
Function: Enable debug switch of PIM-DM state-refresh timer information in detail; the “no debug pim
timer srt” command disenables the debug switch.
Parameter: None.