PLANET XGS3-24040 - Manual (Page 346)

25-59
Example:
Switch#show ipv6 dhcp pool binding
25.27 show ipv6 dhcp pool
Command:
show ipv6 dhcp pool []
Function:
To show the DHCPv6 address pool information.
Parameter:
is the DHCPv6 address pool name which configured already, and the length less than
32 characters. If the parameter is not provided, then all the DHCPv6 address pool
information will be shown.，
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To display the configuration and dynamic assignment information for DHCPv6 address pool, include
the name of DHCPv6 address pool, the prefix of DHCPv6 address pool, excluded address, DNS
server configuration, relative prefix information and so on. To display assigned address binding
number of address pool that is used as address assignment server. To display assigned prefix
number of address pool that is used as prefix delegation server.
Example:
Switch#show ipv6 dhcp pool poolv6
25.28 show ipv6 dhcp statistics
Command:
show ipv6 dhcp statistics
Function:
To show the statistic of all kinds of DHCPv6 packets by DHCPv6 server.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show ipv6 dhcp server statistics
Address pools 1
Active bindings 0
Expiried bindings 0
Malformed message 0
Message Recieved
DHCP6SOLICIT 0
DHCP6ADVERTISE 0
DHCP6REQUEST 0