PLANET XGS3-24040 - Manual (Page 643)

XGS3 Command Guide
38-72
38.9 Commands for IGMP
38.9.1 clear ip igmp group
Command: clear ip igmp group [A.B.C.D | IFNAME]
Function: Delete the group record of the specific group or interface.
Parameters: A.B.C.D the specific group address; IFNAME the specific interface.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted group record.
Example: Delete all groups.
Switch#clear ip igmp group
Relative Command: show ip igmp group
38.9.2 debug igmp event
Command: debug igmp event
no debug igmp event
Function: Enable debugging switch of IGMP event; the “no debug igmp event” command disenables
the debugging switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode
Usage Guide: Enable debugging switch if querying IGMP event information
Example:
Switch# debug igmp event
igmp event debug is on
Switch# 01:04:30:56: IGMP: Group 224.1.1.1 on interface vlan1 timed out
38.9.3 debug igmp packet
Command: debug igmp packet
no debug igmp packet
Function: Enable debugging switch of IGMP message information; the “no debug igmp packet”
command disenables the debugging switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode
Usage Guide: Enable the debugging switch if querying IGMP message information.
Example:
Switch# debug igmp packet
igmp packet debug is on
Switch #02:17:38:58: IGMP: Send membership query on dvmrp2 for 0.0.0.0