PLANET XGS3-24040 - Manual (Page 196)

13-62
Set MSTP region name to mstp-test.
Switch(config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#description mstp-test
13.1.5 revision-level
Command:
revision-level
no revision-level
Function:
In MSTP region mode, this command is to set revision level for MSTP configuration; the command
“no revision-level” restores the default setting to 0.
Parameter:
is revision level. The valid range is from 0 to 65535.
Command mode:
MSTP Region Mode
Default:
The default revision level is 0.
Usage Guide:
This command is to set revision level for MSTP configuration. The bridges with same MSTP revision
level and same other attributes are considered in the same MSTP region.
Example:
Set revision level to 2000.
Switch(config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)# revision-level 2000
13.1.6 spanning-tree
Command:
spanning-tree
no spanning-tree
Function:
Enable MSTP in global mode and in Port Mode; The command “no spanning-tree” is to disable
MSTP.
Command mode:
Global Mode and Port Mode
Default:
MSTP is not enabled by default.
Usage Guide:
If the MSTP is enabled in global mode, the MSTP is enabled in all the ports except for the ports
which are set to disable the MSTP explicitly.
Example: