PLANET XGS3-24040 - Manual (Page 430)

31-143
31.37 show ip rip
Command:
show ip rip
Function:
Show the routes in the RIP route data base.
Command Mode:
Admin mode
Example:
show ip rip
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B - BGP
Network Next Hop Metric From If Time
R 12.1.1.0/24 20.1.1.1 2 20.1.1.1 Vlan1 02:51
R 20.1.1.0/24 1 Vlan1
Amongst R stands for RIP route, namely a RIP route with the destination network address 12.1.1.0, the
network prefix length as 24, next-hop address at 20.1.1.1. It is learnt from the Ethernet port E1/8 with a
metric value of 2, and still has 2 minutes 51 seconds before time out.
31.38 show ip rip database
Command:
show ip rip database
Function:
Show the routes in the RIP route database.
Command Mode:
Admin mode
Example:
Switch# show ip rip database
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B -BGP
Network Next Hop Metric From If Time
R 10.1.1.0/24 1 Vlan1
R 20.1.1.0/24 1 Vlan2
Command:
show ip rip
31.39 show ip rip interface
Command:
show ip rip interface [<ifname>]
Function:
Show the RIP related messages.