28 set vpnv4 next-hop, 29 set weight, Set vpnv – PLANET XGS3-24040 User Manual
Page 398: Next, Set weight
29-111
Parameter:
<tag-val > is the tag value, ranging between 0~4294967295.
Command Mode:
route-map mode
Usage Guide:
There is a route-tag domain at the AS-external-LSA type LSA. The domain is normally identified by
other routing protocols. To use this command, one match clause should at first be defined.
Example:
Switch#config terminal
Switch(config)#route-map r1 permit 5
Switch(config-route-map)#set tag 60
29.28 set vpnv4 next-hop
Command:
set vpnv4 next-hop <ip_addr>
no set vpnv4 next-hop [
Function:
Configure the next-hop of BGP VPNv4 routing message. The “no set vpnv4 next-hop
[
Parameter:
Command Mode:
route-map mode
Usage Guide:
To use this command, one match clause should at first be defined.
Example:
Switch#config terminal
Switch(config)#route-map r1 permit 5
Switch(config-route-map)#set vpnv4 next-hop 10.1.1.1
29.29 set weight
Command:
set weight
no set weight [
Function:
Configure the weight value of BGP routing message. The “no set weight [
command deletes this configuration.