beautypg.com

PLANET XGS3-24040 User Manual

Page 835

background image

Commands for Reliability Chapter 4 Commands for ULPP

57-10

Command mode: Port mode.

Usage Guide: There are no sequence requirement for the master and slave port configuration in a group,

but the protective VLANs must be configured before the member ports. Each group has only one slave

port, if the slave port exists, then the configuration is fail.

Example: Configure the slave port of ULPP group.

Switch(config)# interface ethernet 1/2

Switch(config-If-Ethernet1/2)# ulpp group 20 slave

See also other documents in the category PLANET Routers: