PLANET XGS3-24040 - Manual (Page 379)

28-92
28.13 ip dhcp snooping trust
Command:
ipv6 dhcp snooping trust
no ipv6 dhcp snooping trust
Function:
Set the port to the trusted port. The no command sets the port to non-trusted port.
Parameters:
None
Command Mode:
Port mode
Default Settings:
By default, the port is non-trusted port.
Usage Guide:
When a port turns into a trusted port from a non-trusted port, the original security policy of the port
will be deleted that means clear all blackhole MAC or undo the shutdown of this port. At the same
time, it allows the DHCPv6 responding packets of this port to be forwarded. When a port turns into a
non-trusted port from a trusted port, forbid the DHCPv6 responding packets to be forwarded and
drop them.
Example:
Set the port as the trusted port.
switch(config-if-ethernet1/1)# ipv6 dhcp snooping trust
28.14 show ipv6 dhcp snooping
Command:
show ipv6 dhcp snooping
Function:
Display the current global cofiguration of DHCPv6 Snooping.
Parameters:
None.
Command Mode:
Any Mode.
Default Settings:
None.
Usage Guide:
Collect the information: the global switch, the trusted attributes of each port, the binding information
number of ports, the warning information number (security policy number) of the ports, etc.
Example:
Display the current global cofiguration of DHCPv6 Snooping.
switch(config)# show ipv6 dhcp snooping
DHCPv6 Snooping is enabled
DHCPv6 Snooping maxnum of action info:10