PLANET XGS3-24040 - Manual (Page 367)

27-80
27.22 show ip dhcp snooping
Command:
show ip dhcp snooping [interface [ethernet] <interfaceName>]
Function:
Display the current cofiguration information of dhcp snooping or display the records of defense
actions of a specific port.
Parameters:
<interfaceName>: The name of the specific port.
Command Mode:
Admin and Configuration Mode.
Default Settings:
None.
Usage Guide:
If there is no specific port, then display the current cofiguration information of dhcp snooping,
otherwise, display the records of defense actions of the specific port.
Example:
switch#show ip dhcp snooping
DHCP Snooping is enabled
DHCP Snooping binding arp: disabled
DHCP Snooping maxnum of action info:10
DHCP Snooping limit rate: 100(pps), switch ID: 0003.0F12.3456
DHCP Snooping droped packets: 0, discarded packets: 0
DHCP Snooping alarm count: 0, binding count: 0,
expired binding: 0, request binding: 0
interface trust action recovery alarm num bind num
--------------- --------- --------- ---------- --------- ----------
Ethernet1/1 trust none 0second 0 0
Ethernet1/2 untrust none 0second 0 0
Ethernet1/3 untrust none 0second 0 0
Ethernet1/4 untrust none 0second 0 1
Ethernet1/5 untrust none 0second 2 0
Ethernet1/6 untrust none 0second 0 0
Ethernet1/7 untrust none 0second 0 0
Ethernet1/8 untrust none 0second 0 1
Ethernet1/9 untrust none 0second 0 0
Ethernet1/10 untrust none 0second 0 0
Ethernet1/11 untrust none 0second 0 0
Ethernet1/12 untrust none 0second 0 0
Ethernet1/13 untrust none 0second 0 0
Ethernet1/14 untrust none 0second 0 0
Ethernet1/15 untrust none 0second 0 0
Ethernet1/16 untrust none 0second 0 0