beautypg.com

6 mls qos aggregate-policy, Mls qos aggregate, Policy – PLANET XGS3-24040 User Manual

Page 219

background image

14-85

Default:

The default CoS value is 0.

Command mode:

Interface Configuration Mode.

Usage Guide:

Configure the default CoS value for switch port. The message ingress cos from this port are default

value whether the message have tag. If the message have no tag, the message cos value for tag is

enactmented.

Example:

Setting the default CoS value of ethernet port 1/1 to 5, i.e., packets coming in through this port will

be assigned a default CoS value of 5 if no CoS value present.

Switch(config)#interface ethernet 1/1

Switch(Config-If-Ethernet1/1)#mls qos cos 5

14.6 mls qos aggregate-policy

Command:

Single Bucket Mode:

mls qos aggregate-policy

({conform-action (drop | set-dscp-transmit | set-prec-transmit

| transmit) | exceed-action (drop | policed-dscp-transmit | transmit) } )

no mls qos aggregate-policy

Dual Bucket Mode:

mls qos aggregate-policy (pir

| ) ({conform-action (drop | set-dscp-transmit

| set-prec-transmit | transmit) exceed-action (drop |

policed-dscp-transmit | transmit) | violate-action (drop | policed-dscp-transmit | transmit)} )

no mls qos aggregate-policy

Function:

Analyze the working mode of the token bucket, whether it is single rate singe bucket, singe rate dual

bucket or dual rate dual bucket. The no operation will delete the mode configuration.

Parameters:

policer_name:the name of aggregation policer;

bits_per_second:the committed information rate - CIR , in Kbps, ranging from 1 to 10000000;

normal_burst_bytes:the committed burst size – CBS, in kb, ranging from 1 to 1000000. When the

configured CBS value exceeds the max limit of the chip, configure the hardware with max number

supported by the chip without any CLI prompt;

pir peak_rate_bps : the peak information rate, in kbps, ranging from 1to 10000000. Without

configuring PIR, the Police works in the single rate dual bucket mode; otherwise in the dual rate dual

bucket mode. Notice: this configuration only exist in the dual bucket mode. Notice: this configuration

only exists in dual bucket mode;

maximum_burst_bytes:the peak burst size, in kb, ranging from 1to 10000000. When the configured

PBS value exceeds the max limit of the chip, configure the hardware with max number supported by