PLANET XGS3-24040 - Manual (Page 697)

XGS3 Command Guide
39-29
Command Mode: Any Mode
Usage Guide: Display multicast router neighbors maintained by the PIM.
Example:
Switch(config)#show ipv6 pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Priority/Mode
Fe80::203:fff:fee3:1244 Vlan1 00:00:10/00:01:35 v2 1 /DR
fe80::20e:cff:fe01:facc Vlan1 00:00:13/00:01:32 v2 1 /
Displayed Information
Explanations
Neighbor Address
Neighbor address
Interface
Neighbor interface
Uptime/Expires
Running time /overtime
Ver
Pim version ,v2 usually
DR Priority/Mode
DR priority in the hello messages from the
neighbor and if the neighbor is the interface’s DP
39.3.36 show ipv6 pim nexthop
Command: show ipv6 pim nexthop
Function: Display the PIM buffered nexthop router in the unicast route table.
Parameter: None
Default: None
Command Mode: Any Mode
Usage Guide: Display the PIM buffered nexthop router information.
Example:
Switch#show ipv6 pim nexthop
Flags: N = New, R = RP, S = Source, U = Unreachable ….
Destination Type Nexthop
Nexthop ..Nexthop Nexthop Metric Pref Refcnt
Num Addr