PLANET XGS3-24040 - Manual (Page 45)

XGS3 Command Guide
1-45
1.1.5 config
Command:
config [terminal]
Function:
Enter Global Mode from Admin Mode.
Parameter:
[terminal] indicates terminal configuration.
Command mode:
Admin Mode
Example:
Switch#config
1.1.6 debug ssh-server
Command:
debug ssh-server
no debug ssh-server
Function:
Display SSH server debugging information; the “no debug ssh-server” command stops displaying SSH server
debugging information.
Default:
This function is disabled by default.
Command mode:
Admin Mode.
Example:
Switch#debug ssh-server
1.1.7 enable
Command:
enable
disable
Function:
Enter Admin Mode from User Mode.
Command mode:
User Mode/ Admin Mode.
Usage Guide:
To prevent unauthorized access of non-admin user, user authentication is required (i.e. Admin user password is
required) when entering Admin Mode from User Mode. If the correct Admin user password is entered, Admin Mode
access is granted; if 3 consecutive entry of Admin user password are all wrong, it remains in the User Mode. Set the
Admin user password under Global Mode with “enable password” command.
Example:
Switch>enable