PLANET XGS3-24040 - Manual (Page 275)

17-33
no tunnel source {|}
Function:
Configure tunnel source.
Parameter:
is the ipv4 address of tunnel source.
Command Mode:
Tunnel Configuration Mode.
Default Situation:
None.
Usage Guide:
None.
Example:
Configure tunnel source IPv4 address 202.89.176.6.
Switch(Config-if-Tunnel1)#tunnel source 202.89.176.6
17.2.39 tunnel destination
Command: .
tunnel destination
no tunnel destination
Function:
Configure tunnel destination.
Parameter:
is the ipv4 address of tunnel destination.
Command Mode:
Tunnel Configuration Mode.
Default Situation:
None.