PLANET XGS3-24040 - Manual (Page 598)

XGS3 Command Guide
38-27
Ver/Mode
Pim version and mode,usually v2,sparse mode
displays S,dense mode displays D
Nbr Count
The interface’s neighbor count
DR Prior
Dr priority
DR
The interface’s DR address
38.3.34 show ip pim mroute sparse-mode
Command: show ip pim mroute sparse-mode [group <A.B.C.D>] [source <A.B.C.D>]
Function: Display the multicast route table of PIM-SM.
Parameter: group : Display redistributed items that related to this multicast address
source : Display redistributed items that related to this source
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display the BSP routers in the network maintained by PIM-SM.
Example:
Switch #show ip pim mroute sparse-mode
IP Multicast Routing Table
(*,*,RP) Entries: 0
(*,G) Entries: 1
(S,G) Entries: 0
(S,G,rpt) Entries: 0
(*, 239.192.1.10)
RP: 10.1.6.1
RPF nbr: 10.1.4.10
RPF idx: Vlan1
Upstream State: JOINED
Local ..l.............................
Joined ................................
Asserted ................................
Outgoing ..o.............................